| |
|
 |
 |
|
|
| |
Wire Draw |
| |
Wire Draw Compound is a stable wel balanced mixture of soap and fat available in the form of a paste. It is a very effective coolant in copper Wire Drawing Operations and can also be used in deep drawing operations of thin metal sheets and pressing operations. |
| |
The recommended dilutions for Wire Drawing with water, |
| |
For Heavey Wire Drawing up to 8 Gauge - can be used directly dry on application
For Medium Wire Drawing up to 15 Gauge - 6 to 8 % approximately
For Fine Wire Drawing up to 40 Gauge - 3 to 5 % approximately |
| |
|
| |
Copper Wire Draw Compound is very economical to use and you can draw a huge quantity of wire before the percentage strength in the bath be replenished. |
| |
Apply even wet coat with brush or roll. Although the product may be sprayed, spraying is not recommended due to the long working life of the remover. Over spray may result in damage to painted surfaces not scheduled for removal. The paint film lifts from the surface within 2 to 3 minutes and the air pockets behind the film prevent the stripper from wetting the surface again. In case of multiple layers, depending on how many layers a single application affects, reapplication of stripper may be necessary once the blistered film has been removed. Since the active ingredients in the stripper evaporate slowly, scoring the substrate or working the stripper to maintain uniformly wetted surfaces is beneficial. |
| |
|
|
 |
|
| |
|
|
|
 |
| |
| 1. |
UNDP |
| 2. |
ENOPS |
| 3. |
WHO |
| 4. |
Election Commissions |
| |
|
| |
...more |
|
| |
|
| |
 |
| |
|
Total Fatty matter % wt
